DC Power Meter - Cycle Analyst Large Screen Stand Alone

Availability: Out of stock

$135.00

| Add to Compare

Quick Overview

Cycle Analyst - INS-CA-LSA Voltage Range - 10 - 150VDC Current Range - 0 - 100A (45A continuous)

Suitable for almost any application where batteries are used this meter provides comprehensive information about the state of charge on a large LCD screen.
This stand alone meter has an inbuilt shunt for measuring current and so does not need a separate external shunt.
Once connected to the vehicle's power bus, the Cycle Analyst calculates and shows the following information:

- Volts, Watts, Amps: The instantaneous electric power being drawn from the battery.
- Amp-Hours, Watt Hours: The net energy that has been pulled from the pack since the meter was reset. The accumulated amp-hours let you know the remaining energy in the battery pack with far greater accuracy than a voltage or LED indicator.
- Speed, Distance, Time: All of the basic features of a bicycle computer, including the average and maximum trip speeds, plus a total distance odometer.
- Regen, Wh/km: There are several quantities this meter will calculate that you don't get with other instrumentation, such as the % extra range that was gained from regenerative braking, as well as the vehicle's average energy use in Watt-hours per kilometer or mile.
- Peak Currents and Voltage Sag: Records the maximum forwards and regenerative currents as well as the minimum voltage on the battery pack.
- Total Battery Cycles and Amp-Hours: Retains life cycle information on the vehicle's battery pack, such as how many charge and discharge cycles the pack has experienced and the total amp-hours that were delivered over its entire life.

CA-LSA

Double click on above image to view full picture

More Views

Details

Additional Features

Inbuilt Shunt: Unlike the watt-meters and amp-hour meters designed for RC hobbyists, the Cycle Analyst uses a remote shunt for sensing current rather than running wire through the meter, so you do not need to route heavy gauge battery cables up to the handlebar and back.
Backlit LCD: The display readout is well illuminated for night riding.
Water Resistant: The circuitry is fully enclosed in a sealed box enabling it to withstand exposure to wet and rainy conditions.
Handlebar Mounting: Easily attaches to handlebar tubes from 7/8" to 1 ¼" diameter with included hardware.
Save on Power Down: Trip data such as amp-hours and distance are saved when the meter is shut off, and are restored when power is re-applied.
Fwd and Negative Amps: Both positive and negative amp-hours are displayed separately, so you can calculate accurate regenerative braking statistics or use it to monitor charging currents as well.
Wide Voltage Range: Operates from 10V to 150V, accommodating the vast majority of all small electric vehicles. A high voltage option for use up to 350V is available on special request.
Flexible Speed Input: Detects vehicle speed either with a magnet and sensor cable or through the hall effect signal on brushless motor controllers.
Data Logging: Devices have a serial output stream that can be used for real-time recording the vehicle statistics to a computer or laptop.

Additional Information

Admin	No